Search found 88 matches

by RKanarek
Fri Aug 04, 2023 3:30 am
Forum: TextMaker NX and 2024 for Windows
Topic: Cut-and-Past Pictures Still Do Not Respect Default Settings
Replies: 3
Views: 3242

Re: Cut-and-Past Pictures Still Do Not Respect Default Settings

Dear ST, Thanks for the reply! When I inserted the picture from a file, I used the Object → New Picture command, which I accessed from the classic menu system (no buttons were involved). When I right-click on the picture (see the attached screen capture), I am given the opportunity to “Convert (it) ...
by RKanarek
Wed Aug 02, 2023 10:40 am
Forum: TextMaker NX and 2024 for Windows
Topic: Mouse Triggers TM’s Status Bar Page Display and Zoom
Replies: 3
Views: 3055

Re: Mouse Triggers TM’s Status Bar Page Display and Zoom

Dear SuperTech, Thanks for your quick reply. While no one can question your super'ness, I must confess that I find your advice less super. Admittedly, my primary problem with it is that it would require me to add things to my todo list, which is already overflowing. I'm also not sure that I would be...
by RKanarek
Mon Jul 31, 2023 10:37 am
Forum: TextMaker NX and 2024 for Windows
Topic: Mouse Triggers TM’s Status Bar Page Display and Zoom
Replies: 3
Views: 3055

Mouse Triggers TM’s Status Bar Page Display and Zoom

Greetings, If I move the mouse pointer over the page zoom part of TextMaker’s status bar, I will likely zoom the page even though I am not pushing any of my pointer’s buttons. If Windows’ task bar appears (I have it set to auto-hide), and I click on something that happens to be over one of TextMaker...
by RKanarek
Mon Jul 31, 2023 9:51 am
Forum: PlanMaker NX and 2024 for Windows
Topic: Small error in polynomial coefficients calculation
Replies: 2
Views: 2840

Re: Small error in polynomial coefficients calculation

Dear JezShed,

Just a short note to say the following:
a. I agree with your assessment on SMO vs. MS.
b. I found your post very interesting; thanks!
c. Thanks for having problems fixed before I encounter them! ;-)

Let's hope you have many more issues! ;-)
by RKanarek
Mon Jul 31, 2023 9:45 am
Forum: TextMaker NX and 2024 for Windows
Topic: Cut-and-Past Pictures Still Do Not Respect Default Settings
Replies: 3
Views: 3242

Cut-and-Past Pictures Still Do Not Respect Default Settings

Greetings, Problem: A picture inserted into a TextMaker document via the “New Picture” command (which loads a picture file into a document) results in the picture being inserted in accordance with my “Default” settings. A picture inserted into a document via “Paste Special” → “DIB picture” is insert...
by RKanarek
Mon Jul 10, 2023 12:43 am
Forum: SoftMaker Office NX and 2024 for Windows (General)
Topic: Bring back the real (offline, .chm) help!
Replies: 6
Views: 4903

Bring back the real (offline, .chm) help!

Greetings, As I know more than most, life isn't fair. For a relevant example, consider Microsoft. They make a bloated crappy office suite that lacks any documentation, yet they seem to have met with a "certain" amount of market success. SoftMaker makes (or made) a properly documented, far ...
by RKanarek
Thu Oct 27, 2022 11:45 pm
Forum: Water Cooler
Topic: BeckerCAD14 3D Pro for Windows - Update & Miscelaneous Questions
Replies: 1
Views: 12084

BeckerCAD14 3D Pro for Windows - Update & Miscelaneous Questions

Greetings, Regarding the new (as of Thursday, October 27, 2022) version of BeckerCAD (BeckerCAD14 3D Pro for Windows) that is being marketed to existing SoftMaker and/or SoftMaker BeckerCAD users: a. Must one or should one REMOVE the previous (Softmaker) version BeckerCAD (BeckerCAD12 3D Pro) before...
by RKanarek
Wed Mar 23, 2022 8:42 am
Forum: TextMaker 2021 for Windows
Topic: Opening new document
Replies: 8
Views: 2328

Re: Opening new document

Howdy, Whilst one can modify the new new-dialog-box, one can't modify it to my requirements. What I like is to be able to easily read the template titles, which I always make descriptive (to me, at least, mostly ;-)). Being able/forced to scroll though a sequence of images of blank pages just isn't ...
by RKanarek
Wed Mar 23, 2022 8:14 am
Forum: TextMaker 2021 for Windows
Topic: Table of Contents - Formatting Problem
Replies: 5
Views: 2089

Re: Table of Contents - Formatting Problem

Dear Super, Thanks for your very prompt reply! No, I confess I did not carefully examine the PDF you posted. I have, however, done so now. The TOC in your PDF is correctly formatted, however TextMaker, Windoze, or someone/something else made font substitutions such that the PDF you produced does not...
by RKanarek
Mon Mar 21, 2022 3:30 am
Forum: Water Cooler
Topic: Ashampoo Office 8 on sale for 9GBP for 5 machine license
Replies: 2
Views: 3137

Re: Ashampoo Office 8 on sale for 9GBP for 5 machine license

Greetings, My belated two cents: As a question about the financial operations of a software company, it is quite interesting. I wouldn't, however, make my purchasing decisions based upon the answer (if you ever get one, which you didn't and probably won't). Let's not forget that we are in a symbioti...
by RKanarek
Mon Mar 21, 2022 3:17 am
Forum: TextMaker 2021 for Windows
Topic: Table of Contents - Formatting Problem
Replies: 5
Views: 2089

Re: Table of Contents - Formatting Problem

Dear Super, I'm sorry to have taken so long to reply, but I am hardly a carefree man-of-leisure. I'm (reasonably) sure that the TOC problem has been occurring for some time, and I'm (absolutely) sure I'd like to get it fixed. Let's start from the beginning and build from there. 1. Did you observe th...
by RKanarek
Mon Mar 21, 2022 2:19 am
Forum: TextMaker 2021 for Windows
Topic: Opening new document
Replies: 8
Views: 2328

Re: Opening new document

Greetings, I am not an SM employee, just a customer. I found your post interesting, so I thought I’d do a little bit of research (emphasis on little) and see if I could help you or at least increase the level in my own pool of knowledge. N.B. Insert an “AFAIK” before every declarative statement. ;-)...
by RKanarek
Fri Jan 21, 2022 11:57 pm
Forum: TextMaker 2021 for Windows
Topic: TextMaker Pro 2021 Crashes with some Pastes
Replies: 3
Views: 1358

Re: TextMaker Pro 2021 Crashes with some Pastes

Dear Super,

Wow, that's super! Thanks for the update! If only Bill were as attentive to his customers!
by RKanarek
Fri Jan 14, 2022 12:00 am
Forum: FreeOffice 2021 for Windows (General)
Topic: How do I enter my free product number / key?
Replies: 2
Views: 5508

Re: How do I enter my free product number / key?

Greetings, TextMaker Pro (the non-free version -- support the home team!) has a "Manage License…" option under "Help" when using the classic interface. I'm sure the option also appears somewhere when using the "ribbon" interface. Perhaps the free version does likewise? ...
by RKanarek
Tue Jan 11, 2022 10:26 am
Forum: TextMaker 2021 for Windows
Topic: Table of Contents - Formatting Problem
Replies: 5
Views: 2089

Table of Contents - Formatting Problem

Greetings, Please forgive me if I am being redundant, but the following problem (which I may have reported previously) has crossed my path again. If you exam either of the attached files, you will notice that the page number for the line that starts with “1. PC RS232 Port …” does not appear where it...

Go to advanced search