exe. file

Post bug reports and suggestions for TextMaker 2008 for Windows CE.

Moderator: SoftMaker Team

aaaa1234
Posts: 15
Joined: Mon Feb 16, 2009 1:07 pm

exe. file

Postby aaaa1234 » Sun Feb 22, 2009 1:27 pm

I hav a windows ce 5.0 device, I TRIED TO instal the trial version . but it seems like my device dosn't support this type of cab files.
I would be happy to try instaling it throgh the "active sync" software so please provide a link to an "exe" file for this
thanks

sven-l
SoftMaker Team
SoftMaker Team
Posts: 7189
Joined: Wed Apr 09, 2008 8:26 am
Location: Nuremberg
Contact:

Re: exe. file

Postby sven-l » Mon Feb 23, 2009 9:19 am

Hello,

what device do you use? Please make sure to use the correct trial version for Windows CE:

http://www.softmaker.com/english/ofcdemo_en.htm
Sven Leßmann
SoftMaker Software GmbH

bigbuffalo
Posts: 3
Joined: Sat Jul 03, 2010 5:48 am

Re: exe. file

Postby bigbuffalo » Sat Jul 03, 2010 6:00 am

Dear Sven Leßmann

I have same issue.
My machine is actual an pocket GPS with ARM11 processor running Window CE6.0.
I can access to Window CE to add/run program. So I would like to use it to edit word and excel sheet, on top of it basic GPS function. But it does not have any cab extractor to install CAB program. Any help ?
Besides, can SoftMaker software run on ARM11 processor as only StrongARM processor is mentioned in the manual ?

sven-l
SoftMaker Team
SoftMaker Team
Posts: 7189
Joined: Wed Apr 09, 2008 8:26 am
Location: Nuremberg
Contact:

Re: exe. file

Postby sven-l » Tue Jul 06, 2010 9:35 am

TextMaker 2008 and 2010 for Windows CE should run properly with every ARM processor and Window CE6.0. what exactly happens if you copy the cab file to the device and double click on it? The installation should start automatically.
Sven Leßmann
SoftMaker Software GmbH

bigbuffalo
Posts: 3
Joined: Sat Jul 03, 2010 5:48 am

Re: exe. file

Postby bigbuffalo » Tue Jul 13, 2010 5:05 am

When double click the CAB file, a error window showing the following message:

There is no application software related to "SoftMaker TextMaker". Please first run the application and then open this document with that application.

Note: The above message is translated from Chinese, and may not be exactly the same as the message displayed on english version window CE.

sven-l
SoftMaker Team
SoftMaker Team
Posts: 7189
Joined: Wed Apr 09, 2008 8:26 am
Location: Nuremberg
Contact:

Re: exe. file

Postby sven-l » Tue Jul 13, 2010 9:53 am

Can you please delete this file and download the cab file again? Does the problem still occur with the new cab file?
Sven Leßmann
SoftMaker Software GmbH

bigbuffalo
Posts: 3
Joined: Sat Jul 03, 2010 5:48 am

Re: exe. file

Postby bigbuffalo » Mon Jul 19, 2010 8:01 am

I have tried to download the CAB file twice again, but same error window still pop up. :(
It seems the installer to install CAB file is missing. Any help or suggestion :?:

sven-l
SoftMaker Team
SoftMaker Team
Posts: 7189
Joined: Wed Apr 09, 2008 8:26 am
Location: Nuremberg
Contact:

Re: exe. file

Postby sven-l » Mon Jul 19, 2010 11:03 am

It seems that the manufacturer of your GPS system has not implemented an cab installer. Please ask your dealer or the manufacturer.
Sven Leßmann
SoftMaker Software GmbH


Return to “TextMaker 2008 for Windows CE”

Who is online

Users browsing this forum: No registered users and 1 guest